有一個年輕人喜歡上了在便利商店打工的女孩,他每天都會到女孩工作的店裡面買一包香煙,
漸漸的兩人開始互相熟悉,當女孩工作感到無聊乏味的時候,
年輕人就會出現,他會陪女孩說說話 ,或是逗女孩開心.
女孩也知道年輕人似乎喜歡上自己了,可是自己已經有很要好的男友.
有商店夾公仔機...女孩很喜歡裡面的娃娃,
年輕人知道以後,當天他終於對她表白,希望女孩能接受他,
不知如何是好的女孩,只能殘忍的告訴年輕人,她和他是不可能的,
因為她已經有深愛的男友了,年輕人聽了之後默然的點點頭,
他不死心的問女孩,自己真的沒有機會了嗎?
善良的女孩不忍心....
於是她手指著娃娃機裡面的絨毛娃娃說,
除非你夾滿100個娃娃,而且一天只能夾一個.
原來女孩希望用時間來沖淡年輕人對自己的感情 ,
她心想,一天夾1個娃娃, 最快也要三個多月之後才有100個,
而且年輕人應該不會真的有耐心夾滿100個娃娃吧
這三個月的時間,她會盡量與男孩保持距離,
年輕人還是每天到商店來,可是女孩開始變得冷淡,
他總是試著聊一些女孩有興趣的話題,不過女孩依然愛理不理.
因為她知道唯有這樣做,才不會讓年輕人越陷越深.
年輕人或許是感覺到女孩的用意,
於是他每天夾娃娃,有時運氣好夾一兩次就中了,
有時運氣差,零用錢花光了也夾不到,只好跟朋友借錢繼續夾,一直到夾中為止.
無論花多少錢花多少時間,他每天一定會夾一個娃娃,
只是他無法與女孩分享夾到娃娃的喜悅,
因為他知道女孩有意要避開他,
為了怕引響到女孩的情緒,他只能在櫥窗外頭微笑的對女孩點點頭.
好幾次,看到年輕人因為夾到娃娃興高采烈的樣子,
女孩都想要衝出去對他說,
我是騙你的,你不要再夾了,就算你真的夾到100個娃娃,我跟你也是不可能的!
但是一想到年輕人希望破滅的樣子,女孩就於心不忍,她只能不斷猶豫.
就這樣1 天,2天,3天..,年輕人的娃娃數量不斷的累積,而女孩刻意與年輕人保持距離的結果,
則是讓自己在工作的時後更顯孤單.不知道是哪一天,女孩子因為在外地工作的男友無法回來陪她過18歲的生日,
與男友吵了一架,而那天年輕人仍一如往常的來到便利商店,
不同的是那天年輕人竟走進了店裡,他對女孩說,
可不可以破例讓他在今天夾兩個娃娃回去,
可是因為和男友吵架而心情不佳的女孩,很生氣的當場拒絕了他.
就這樣,年輕人走到娃娃機旁,默默的夾了一個娃娃回去,
在年輕人離開的時後,他對櫥窗裡的女孩看了一眼.
隔天以後,年輕人再也沒來夾娃娃了.剛開始女孩雖然覺得奇怪,但是仍然慶幸自己終於放下了心中的大石頭.
可是漸漸的,她突然覺得不習慣,
因為那個每天都會為了她來夾娃娃的熟悉背影,
好像空氣一樣就消失不見了,這時女孩才發現到,
原來她心中的失落感遠遠超過年輕人所帶給她的負擔.
只是一切都...女孩開始想念以前年輕人來店裡陪她聊天的點點滴滴.
哪怕他只是站在櫥窗外頭沉默不語的夾娃娃,
似乎都會帶給她莫名的安全感.
所以女孩每天上班時,總是不斷的抬頭張望,
那個熟悉的身影來了嗎?
可惜的是,年輕人始終沒出現, 只剩下那台沒人使用的娃娃機.
有一天,女孩下班後,在店門口遇到了以前常和年輕人一起來的朋友,
她焦急的問他年輕人的下落,可是年輕人的朋友則是一臉黯然,
他帶女孩來到年輕人的家,
當他開啟年輕人的房間的門時,映入女孩眼簾的是
一群娃娃機裡面的絨毛娃娃,以及躺在床上動也不動的年輕人.
原來年輕人的脊椎有病,必須要開刀才能保住生命,
可是開刀有一半的機率會失敗而導致全身癱瘓,
年輕人在開刀的前一天晚上,也就是女孩和男友大吵一架的那天,
希望女孩給他機會夾2個娃娃,因為他已經累積有98個了,
然而卻遭到女孩的回絕,隔天之後年輕人手術不幸失敗變成植物人,
年輕人的母親拿了一封信給女孩,那是年輕人在手術之前寫好的:
其實我早就知道,就算夾到了100個娃娃,
妳也不可能會喜歡我,我之所以這麼做並不是故意要造成妳的困擾,
而是希望在我有限的時間裡,
證明我曾經很用心的去愛一個人,
這樣就足夠了,如果妳看到了這封信,
那表示我再也無法為你夾娃娃了,對不起,或許我的努力還不夠吧,
沒能夾到100個娃娃親手送給你..
女孩看著床邊的99個絨毛娃娃,那是99顆無法承受的真心,
眼眶裡的淚水早已決堤而出...
隔天女孩來到年輕人的家,
她將第100個絨毛娃娃放到年輕人的手中,
這時已經變成植物人的他,
眼睛流下了淚水...
Monday, May 24, 2010
Monday, May 10, 2010
How to make your pendrive bootable
After getting this new laptop, I just wanted to format my old dell inspiron 9400. This laptop when was past 3 years ago, is really fast and equipped with powerful graphic cards GeForce 7900. Which I think for that time can play most of the game. I guess doom 3 was released not really long that time too. But that time the shadow in 3D was not so intensive, this laptop can run most of the game without problem, even for Crysis and crysis warhead can be completed without much problem on medium settings. Hmm but end up now it can't run most of the 3D game on lowest setting especially this bad company 2. That game lacks so much when it was play on my inspiron 9400. And the DVD ROM is FUBAR. So I can't format and reinstall my OS. But with nowadays technology everything is possible. I start to look for information to boot up using Pendrive, as i know my motherboard and BIOS supported that function.
So I assume you all have windows 7 or vista since windows 7 is real good now.
1. Insert USB drive to your pc and make sure you must backup all the data inside before proceeed to next step. After that, just remember to check which drive is your USB.
2. Go to start menu and type cmd at the search box, it will have cmd.exe at the top. Just right click on it and run as administrator. When there is a dialog box, just press YES! to continue.
3. When the Command Prompt opens, enter the following command:
DISKPART and hit enter. (I think in older version is fixdisk.
LIST DISK and hit enter.
after you have entered the LIST DISK command, it will show the disk number of your USB drive. In my laptop cause I have 1 physical hard disk, my USB drive disk no is shown as Disk 1.
4. In this step you need to enter all the below commands one by one and hit enter. As these commands are rather easy, you can easily guess what these commands do.
SELECT DISK 1 (if you have 2 physical hard disk you can have SELECT DISK 2 and so on)
CLEAN
CREATE PARTITION PRIMARY (in older fdisk this is to create primary partition so later you can boot with it)
SELECT PARTITION 1 (select the first partition)
ACTIVE (make the partition to become active)
FORMAT FS=NTFS QUICK (format the disk with NTFS)
ASSIGN (assign a disk drive)
EXIT (and exit(
after exit from DISKPART just do the following.
5. Insert your Windows CD/DVD in the optical drive and note down the drive letter of the optical drive and USB media. If you are using daemon tools or any virtual image, it still works. My daemon tools mount is DRIVE I. and my USB is DRIVE H.
6. Go back to command prompt and execute the following commands:
I: (ENTER!)
CD\BOOT (HIT ENTER)
BOOTSECT.EXE /NT60 H:
(Where “H” is your USB drive)
(you will see a message that your drive H: is successfully made bootable). If it is not, may be you are not running your cmd.exe using administrator mode or there is other error message that you might wanna share here.
7. Copy Windows CD/DVD contents to USB.
so now you will get a bootable windows USB drive.
I have tried this on windows server 2008 and it works. I am not sure about windows XP, perhaps you can use a windows 7 ,vista or server 2008 to bootsect it. then copy all the contents over.
And to my suprise it is so easy to make it. If you are having windows 7 and vista. I believe the below command can be done using win XP fix disk. I remember when I was using DOS, we have to use fdisk alot.
So I assume you all have windows 7 or vista since windows 7 is real good now.
1. Insert USB drive to your pc and make sure you must backup all the data inside before proceeed to next step. After that, just remember to check which drive is your USB.
2. Go to start menu and type cmd at the search box, it will have cmd.exe at the top. Just right click on it and run as administrator. When there is a dialog box, just press YES! to continue.
3. When the Command Prompt opens, enter the following command:
DISKPART and hit enter. (I think in older version is fixdisk.
LIST DISK and hit enter.
after you have entered the LIST DISK command, it will show the disk number of your USB drive. In my laptop cause I have 1 physical hard disk, my USB drive disk no is shown as Disk 1.
4. In this step you need to enter all the below commands one by one and hit enter. As these commands are rather easy, you can easily guess what these commands do.
SELECT DISK 1 (if you have 2 physical hard disk you can have SELECT DISK 2 and so on)
CLEAN
CREATE PARTITION PRIMARY (in older fdisk this is to create primary partition so later you can boot with it)
SELECT PARTITION 1 (select the first partition)
ACTIVE (make the partition to become active)
FORMAT FS=NTFS QUICK (format the disk with NTFS)
ASSIGN (assign a disk drive)
EXIT (and exit(
after exit from DISKPART just do the following.
5. Insert your Windows CD/DVD in the optical drive and note down the drive letter of the optical drive and USB media. If you are using daemon tools or any virtual image, it still works. My daemon tools mount is DRIVE I. and my USB is DRIVE H.
6. Go back to command prompt and execute the following commands:
I: (ENTER!)
CD\BOOT (HIT ENTER)
BOOTSECT.EXE /NT60 H:
(Where “H” is your USB drive)
(you will see a message that your drive H: is successfully made bootable). If it is not, may be you are not running your cmd.exe using administrator mode or there is other error message that you might wanna share here.
7. Copy Windows CD/DVD contents to USB.
so now you will get a bootable windows USB drive.
I have tried this on windows server 2008 and it works. I am not sure about windows XP, perhaps you can use a windows 7 ,vista or server 2008 to bootsect it. then copy all the contents over.
Subscribe to:
Posts (Atom)